Equipment specification reference

Reviewed 26 September 2026. This catalog supports the LVD system designer. Ratings apply to the stated operating mode; availability, firmware and installation acceptance still require project review.

Return to system designer

Amplifiers

Recommendations use a single model per design, one mono Hi-Z output per zone, and 20% output-power headroom. Candidates must satisfy every zone; ranking favors fewer chassis, then less unused rated power. This is not a price comparison. Q-SYS uses continuous all-channel ratings; no burst, parallel-output or asymmetric power-sharing optimization is assumed.

Model	Usable Hi-Z channels	W/channel at 70V	100V	Rack / depth	Audio	Source
LEA Connect 84	4	80	80	1U / 362 mm	analog	Manufacturer source
LEA Connect 84D	4	80	80	1U / 362 mm	dante, aes67, analog	Manufacturer source
LEA Connect 88	8	80	80	1U / 362 mm	analog	Manufacturer source
LEA Connect 88D	8	80	80	1U / 362 mm	dante, aes67, analog	Manufacturer source
LEA Connect 164	4	160	160	1U / 362 mm	analog	Manufacturer source
LEA Connect 164D	4	160	160	1U / 362 mm	dante, aes67, analog	Manufacturer source
LEA Connect 168	8	160	160	1U / 362 mm	analog	Manufacturer source
LEA Connect 168D	8	160	160	1U / 362 mm	dante, aes67, analog	Manufacturer source
LEA Connect 352	2	350	350	1U / 362 mm	analog	Manufacturer source
LEA Connect 352D	2	350	350	1U / 362 mm	dante, aes67, analog	Manufacturer source
LEA Connect 354	4	350	350	1U / 362 mm	analog	Manufacturer source
LEA Connect 354D	4	350	350	1U / 362 mm	dante, aes67, analog	Manufacturer source
LEA Connect 702	2	700	700	1U / 362 mm	analog	Manufacturer source
LEA Connect 702D	2	700	700	1U / 362 mm	dante, aes67, analog	Manufacturer source
LEA Connect 704	4	700	700	1U / 362 mm	analog	Manufacturer source
LEA Connect 704D	4	700	700	1U / 362 mm	dante, aes67, analog	Manufacturer source
Q-SYS CX-Q 2K4	4	350	400	2U / 406 mm	qlan	Manufacturer source
Q-SYS CX-Q 4K4	4	550	625	2U / 406 mm	qlan	Manufacturer source
Q-SYS CX-Q 8K4	4	1150	1150	2U / 406 mm	qlan	Manufacturer source
Q-SYS CX-Q 4K8	8	300	300	2U / 406 mm	qlan	Manufacturer source
Q-SYS CX-Q 8K8	8	600	600	2U / 406 mm	qlan	Manufacturer source
Sonance DSP 2-750 MKIII	2	750	Not verified	2U / 437 mm	analog	Manufacturer source
Blaze by Sonance PowerZone Connect 504D	2	250	250	1U / 321 mm	dante, analog	Manufacturer source
Blaze by Sonance PowerZone Connect 1008D	4	250	250	1U / 321 mm	dante, analog	Manufacturer source
Blaze by Sonance PowerZone Connect 504	2	250	250	1U / 321 mm	analog	Manufacturer source
Blaze by Sonance PowerZone Connect 1008	4	250	250	1U / 321 mm	analog	Manufacturer source

Sonance commercial speakers

Tap validation does not determine coverage or SPL. Model selection needs ceiling height, room dimensions, mounting conditions and listening requirements. The dual-10 subwoofer can share a channel using its internal low-pass filter; independent sub control needs a separate zone. Finish and mounting accessories are selected in the quote.

Model	70V taps (W)	100V taps (W)	Source
PS-C83RWT	15, 30, 60, 120	30, 60, 120	Manufacturer source
PS-P83WT	15, 30, 60, 120	30, 60, 120	Manufacturer source
PS-S210SUBT	75, 150, 300	150, 300	Manufacturer source
PS-S43T MKII	3.8, 7.5, 15, 30	7.5, 15, 30	Manufacturer source
PS-S53T MKII	3.8, 7.5, 15, 30	7.5, 15, 30	Manufacturer source
PS-S63T MKII	7.5, 15, 30, 60	15, 30, 60	Manufacturer source
PS-S83T MKII	7.5, 15, 30, 60	15, 30, 60	Manufacturer source
PS-S83WT MKII	15, 30, 60, 120	30, 60, 120	Manufacturer source
PS-C85RT	15, 30, 60, 120	30, 60, 120	Manufacturer source
PS-P85T	15, 30, 60, 120	30, 60, 120	Manufacturer source
PS-S85T	15, 30, 60, 120	30, 60, 120	Manufacturer source
PS-C43RT	3.8, 7.5, 15, 30	7.5, 15, 30	Manufacturer source
PS-C63RT	7.5, 15, 30, 60	15, 30, 60	Manufacturer source
PS-C83RT	7.5, 15, 30, 60	15, 30, 60	Manufacturer source
PS-P43T	3.8, 7.5, 15, 30	7.5, 15, 30	Manufacturer source
PS-P63T	7.5, 15, 30, 60	15, 30, 60	Manufacturer source
PS-P83T	7.5, 15, 30, 60	15, 30, 60	Manufacturer source
PS-C41RT	3.2, 6.3, 12.5, 25	6.3, 12.5, 25	Manufacturer source
PS-C61RT	4, 8, 16, 32	8, 16, 32	Manufacturer source
PS-C43RTLP	3.8, 7.5, 15, 30	7.5, 15, 30	Manufacturer source
PS-C63RTLP	7.5, 15, 30, 60	15, 30, 60	Manufacturer source

Switches

Counts include port and PoE headroom, with two copper ports conservatively reserved per switch. SFP/SFP+ uplinks are separate. Exact topology, per-port PoE classes and multicast/audio commissioning remain required. Uplink cables are separately listed; manufacturer uplink speed is not installed throughput.

Model	Copper / PoE ports	PoE budget	Uplink	Rack / depth	Source
NETGEAR M4250 GSM4230P	26 / 24	300 W	1G	1U / 257 mm	Manufacturer source
NETGEAR M4250 GSM4230PX	26 / 24	480 W	10G	1U / 400 mm	Manufacturer source
NETGEAR M4250 GSM4248PX	40 / 40	960 W	10G	1U / 400 mm	Manufacturer source
UniFi USW-Pro-24-PoE	24 / 24	400 W	10G	1U / 285 mm	Manufacturer source
UniFi USW-Pro-48-PoE	48 / 48	600 W	10G	1U / 400 mm	Manufacturer source

Q-SYS Core I/O

Flex channels are shared between input and output, not additional channels in both directions. Included Dante capacity does not cover all designs; license and firmware checks remain required. Core selection is not a complete DSP-resource calculation.

Core	Analog in / out / Flex	Network I/O each way	Included Dante each way	Source
Core Nano	0 / 0 / 0	64	8	Manufacturer source
Core 8 Flex	0 / 0 / 8	64	8	Manufacturer source
Core 110f	8 / 8 / 8	128	8	Manufacturer source
Core 24f	8 / 8 / 8	160	8	Manufacturer source

Video and remaining equipment

ATX VSBB100: MPEG-2/H.264 up to 1080p60; TS/UDP; 100Mbps LAN; Pro:Idiom; HDMI; external 12V supply. Manufacturer source
LVD modified LinkPi eight-channel encoder: eight HDMI inputs confirmed by LVD; chassis, thermal, power and firmware limits remain LVD engineering data.
LinkPi ENC3 decoder: model identified by LVD. Exact public datasheet not established; do not substitute ENC1-V3 ratings. Pro:Idiom COM3000 requires VSBB.
COM3000: chassis/card/license configuration and satellite distribution remain an engineered quote. No generic headend count is represented as an exact SKU.
Global Caché IP2IR: three independently addressed IR ports; standard model uses external power. Manufacturer source
Strong racks and SnapAV cooling use the published heights, depths and compatibility already linked in the Rack step. Verify mounting hardware and loaded weight.
UDM Pro, PDU Pro and UPS Pro use the published rack allocations already in the designer; UPS runtime and total thermal load are not calculated from amplifier output watts.
DIRECTV receivers, cable boxes, EverPass/Rockbot players, TouchTunes interfaces and control panels still need exact orderable models. Their port/shelf counts are allowances.

Cable-count rules

One HDMI cord per HDMI source and one per display; COM3000 IP programs do not consume source HDMI cords. One rack-side patch cord per planned network connection, plus a device-side patch cord for each remote display decoder, control panel and TouchTunes connection. Each group adds the selected rounded spare allowance. Structured cable runs, field termination hardware, audio leads, redundant links and final lengths require a site cable schedule. Uplink media is selected separately.